Great reasons to buy from us:
-
Quality Assurance
Quality Assurance -
Expert Guidance -
Customers Over Profits
Looking for that perfect bass package but are overwhelmed by all the options? We have made it easy with our loaded subwoofer box the LSE212A! This is a prefabricated box that comes with a pair of some of our best selling subwoofers. Included is a beautiful carpeted box with DS18 designs tuned to 35 hz. The box is constructed by thick 1/2 MDF for great sound and resonance. The subs included are the very popular MD12.4's that are single voice coil 4 ohm subs wired in parallel for a final nominal impedance of 2 ohms that will require 500w rms. This loaded box is a great entry level solution to hard hitting heavy bass for all to enjoy.
Highlights
- The box is constructed of 1/2 inch MDF for great strength, resonance, and tuned to 35hz for low hitting bass.
- Two SLC 12 inch subs will give you the cone area to push out great sounding bass without a lot of power requirements.
- Great design and carpeting with DS18 logos to give your system the flair it deserves and also brings a show quality look.
-
S-1500.1 AMPLIFIER
| Amplifier | |
| Circuit Topology | Class AB Monoblock Amplifier |
| RMS Power Output @ 2 OHMS | 350 watts |
| RMS Power Output @ 4 OHMS | 220 watts |
| Total Harmonic Distortion | < 3% |
| S/N Ratio Ref 1w @ 4 OHMS | >90db |
| Gain Range | 0.2-6V |
| Crossover Range | 50-250hz |
| Frequency Range | 20Hz-500 Hz |
| Dimensions | 13.7/348mm x 5.8/148mm x 1.8 / 47.5mm |
- 4-GA AMP KIT - 500 WATTS
- AGU Fuse Holder With AGU-100A
- 6ft. 4GA Loom Tube
- Rubber Grommet
- 17ft. Red Power Cable: 21mm² OD: 10mm
- 3ft. Black Ground Cable: 21mm² OD: 10mm
- 17ft. Red/Black Twisted RCA Cable
- 17ft. Turn-On Cable: 20*0.15mm
- 17ft. Red/Black Speaker Cable: 1.31mm² x 2 wires OD 3.2 x 6.4mm
- SLC-MD12 IN A PORTED BOX
| Model: | SLC-MD12 |
| Type: | Subwoofer |
| Size: | 12" |
| RMS Power: | 250W |
| MAX Power: | 500W |
| Impedance: | 4 |
| Voice Coil Size: | 2" |
| Magnet: | Ferrite |
| Magnet Size: | 42oz |
| General | |
| Speaker Size | 2 x 12" |
| Total Impedance | 2 ohms |
| Total RMS Power Handling | 500 watts |
| Total MAX Power Handling | 1000 watts |
| Sensitivity (1w/1m) | 96db |
| Frequency Response | 29-250hz |
| Recommended Lo Pass Crossover | 80 Hz |
| Subwoofer | |
| Voice Coil Diameter | 50.8mm (2) |
| Voice Coil Former Material | Aluminum |
| Winding Material | ACCAW |
| Cone Material | PPI |
| Surround Material | Rubber |
| Basket Material | Steel |
| Magnet Material | Ferrite |
| Magnet Weight | 42oz |
| Box Specifications | |
| Port Tune | 35hz |
| Dust Cap Material | 45.3L |
| Load Configuration | Front Ported |
| Box Material | 1/2" MDF |
| Finish Material | Vinyl |
| Measurements | |
| Height | 13.78 / 350mm |
| Width | 38.58" / 980mm |
| Depth 1 | 11 / 280mm |
| Depth2 | 14 / 356mm |
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |
Description
Looking for that perfect bass package but are overwhelmed by all the options? We have made it easy with our loaded subwoofer box the LSE212A! This is a prefabricated box that comes with a pair of some of our best selling subwoofers. Included is a beautiful carpeted box with DS18 designs tuned to 35 hz. The box is constructed by thick 1/2 MDF for great sound and resonance. The subs included are the very popular MD12.4's that are single voice coil 4 ohm subs wired in parallel for a final nominal impedance of 2 ohms that will require 500w rms. This loaded box is a great entry level solution to hard hitting heavy bass for all to enjoy.
Highlights
- The box is constructed of 1/2 inch MDF for great strength, resonance, and tuned to 35hz for low hitting bass.
- Two SLC 12 inch subs will give you the cone area to push out great sounding bass without a lot of power requirements.
- Great design and carpeting with DS18 logos to give your system the flair it deserves and also brings a show quality look.
-
S-1500.1 AMPLIFIER
| Amplifier | |
| Circuit Topology | Class AB Monoblock Amplifier |
| RMS Power Output @ 2 OHMS | 350 watts |
| RMS Power Output @ 4 OHMS | 220 watts |
| Total Harmonic Distortion | < 3% |
| S/N Ratio Ref 1w @ 4 OHMS | >90db |
| Gain Range | 0.2-6V |
| Crossover Range | 50-250hz |
| Frequency Range | 20Hz-500 Hz |
| Dimensions | 13.7/348mm x 5.8/148mm x 1.8 / 47.5mm |
- 4-GA AMP KIT - 500 WATTS
- AGU Fuse Holder With AGU-100A
- 6ft. 4GA Loom Tube
- Rubber Grommet
- 17ft. Red Power Cable: 21mm² OD: 10mm
- 3ft. Black Ground Cable: 21mm² OD: 10mm
- 17ft. Red/Black Twisted RCA Cable
- 17ft. Turn-On Cable: 20*0.15mm
- 17ft. Red/Black Speaker Cable: 1.31mm² x 2 wires OD 3.2 x 6.4mm
- SLC-MD12 IN A PORTED BOX
| Model: | SLC-MD12 |
| Type: | Subwoofer |
| Size: | 12" |
| RMS Power: | 250W |
| MAX Power: | 500W |
| Impedance: | 4 |
| Voice Coil Size: | 2" |
| Magnet: | Ferrite |
| Magnet Size: | 42oz |
| General | |
| Speaker Size | 2 x 12" |
| Total Impedance | 2 ohms |
| Total RMS Power Handling | 500 watts |
| Total MAX Power Handling | 1000 watts |
| Sensitivity (1w/1m) | 96db |
| Frequency Response | 29-250hz |
| Recommended Lo Pass Crossover | 80 Hz |
| Subwoofer | |
| Voice Coil Diameter | 50.8mm (2) |
| Voice Coil Former Material | Aluminum |
| Winding Material | ACCAW |
| Cone Material | PPI |
| Surround Material | Rubber |
| Basket Material | Steel |
| Magnet Material | Ferrite |
| Magnet Weight | 42oz |
| Box Specifications | |
| Port Tune | 35hz |
| Dust Cap Material | 45.3L |
| Load Configuration | Front Ported |
| Box Material | 1/2" MDF |
| Finish Material | Vinyl |
| Measurements | |
| Height | 13.78 / 350mm |
| Width | 38.58" / 980mm |
| Depth 1 | 11 / 280mm |
| Depth2 | 14 / 356mm |
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |
