Great reasons to buy from us:
-
Quality Assurance
Quality Assurance -
Expert Guidance
-
Customers Over Profits
The Pitbull 20k competition series amplifier is a 20,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It’s built with the best of the Best parts from the Mosfets to the Large Tiffany Jacks.
It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.
Features | Voltage | 10.0kw | |
Output Power (RMS) | 4 ohm | 14.4V | 3,000Wx1 |
4 ohm | 14.4V | 7500x1 | |
2 ohm | 14.4V | 13,000x1 | |
1 ohm | 14.4 | 20,000x1 | |
Input Sensitivity | 6V~0.2V | ||
Low Pass Filter | Switchable | ||
( @ 24 dB Slope) | Variable | Hz | 35~250 |
Subsonic Filter | Switchable | ||
( @ 24 dB Slope) | Variable | Hz | 10~50 |
Bass Boost | Variable | dB | 0-9dB |
Frequency Response | Hz | 15-270 | |
Signal to Noise Ratio | dB | 85 | |
Damping factor | 300< | ||
Efficiency @ 4ohm | % | Over 90% | |
THD @ 4ohms | Less than 0.1% | ||
Fuse Rating | 2,000 Amps | ||
Indicator | Power | Yes | |
Protection | Yes | ||
Clip | Yes | ||
Speaker & Power terminal | Mold Type | Yes | |
Power | Gauge | 0Ga x 3 | |
Heatsink Length | 37.75" (940mm) | ||
Heatsink Length | 11.5" (292mm) | ||
Heatsink Length | 2.6" (66mm) |
Shipping | This item ships to |
Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |
Description
The Pitbull 20k competition series amplifier is a 20,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It’s built with the best of the Best parts from the Mosfets to the Large Tiffany Jacks.
It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.
Features | Voltage | 10.0kw | |
Output Power (RMS) | 4 ohm | 14.4V | 3,000Wx1 |
4 ohm | 14.4V | 7500x1 | |
2 ohm | 14.4V | 13,000x1 | |
1 ohm | 14.4 | 20,000x1 | |
Input Sensitivity | 6V~0.2V | ||
Low Pass Filter | Switchable | ||
( @ 24 dB Slope) | Variable | Hz | 35~250 |
Subsonic Filter | Switchable | ||
( @ 24 dB Slope) | Variable | Hz | 10~50 |
Bass Boost | Variable | dB | 0-9dB |
Frequency Response | Hz | 15-270 | |
Signal to Noise Ratio | dB | 85 | |
Damping factor | 300< | ||
Efficiency @ 4ohm | % | Over 90% | |
THD @ 4ohms | Less than 0.1% | ||
Fuse Rating | 2,000 Amps | ||
Indicator | Power | Yes | |
Protection | Yes | ||
Clip | Yes | ||
Speaker & Power terminal | Mold Type | Yes | |
Power | Gauge | 0Ga x 3 | |
Heatsink Length | 37.75" (940mm) | ||
Heatsink Length | 11.5" (292mm) | ||
Heatsink Length | 2.6" (66mm) |
Shipping
Shipping | This item ships to |
Delivery | Estimated between and . Will usually ship within 1-3 businesses day. |